Reach us here or email info@4x4downunder.com.au
Roof Rack Accessories
Adventure-Ready Roof Rack Accessories for Every Journey
When you’re loading up for a weekend away or tackling a long-haul trip, having the right roof rack accessories can make all the difference. These aren’t just add-ons, they’re the bits that make your whole setup work harder, pack smarter, and stay secure, no matter how rough the road ahead gets.
Read more
Choosing the right roof rack accessories depends on how you travel and what you carry. If you’re hauling jerry cans, water tanks, or recovery gear, sturdy brackets and tie-downs are non-negotiable. For touring setups, awning mounts, shovel holders, and light brackets can transform your rack into a complete camp-ready system.
Look for gear built from UV-stabilised, corrosion-resistant materials — things that can handle the Aussie sun, dust, and salt air. Many of our mounts and brackets use stainless or powder-coated steel for durability and peace of mind on corrugated tracks. Most items are universal, fitting major rack systems like Front Runner, Rhino-Rack, and Deltawing, but always check dimensions before you buy.
Whether you’re building a lightweight weekend setup or a full expedition rig, the goal is the same — safety, reliability, and the freedom to carry what you need without compromise. Every accessory here has been chosen for practicality, not gimmicks. Because when you’re 400 km from the nearest servo, you’ll be glad your gear was built right.
Related Reading
- Learn how to safely remove or adjust your roof racks in our guide on removing roof racks.
- For more general advice on roof rack safety, see the Queensland Government’s Load Restraint Guide .
Frequently Asked Questions
Are these roof rack accessories compatible with all roof racks?
Most are designed to fit major brands like Front Runner, Rhino-Rack, and Deltawing. Always check the product specs for exact fitment before purchase.
Can I install these accessories myself?
Yes. Most mounts and brackets can be fitted using basic tools, and installation guides are included where needed. No drilling required in most cases.
What materials are the accessories made from?
We stock a mix of stainless steel, powder-coated steel, and UV-stabilised plastics — all chosen for their resistance to rust, UV, and off-road vibration.
Do I need to re-torque or check fittings after installation?
Yes. Like any 4WD gear, it’s smart to check all bolts and clamps after the first drive and again after any rough terrain to ensure everything stays secure.
Can I use these mounts with a rooftop tent?
In most cases, yes — as long as your rack system has enough load capacity and clearance. Check the product details for specific compatibility notes.
What’s the weight limit for roof rack accessories?
This depends on your vehicle and rack system. Always refer to your vehicle’s roof load rating and keep total weight (rack + gear) within safe limits.
Are these accessories suitable for coastal or desert conditions?
Absolutely. Most components are corrosion-resistant and designed for harsh environments including coastal salt air, desert dust, and tropical humidity.
Do these accessories meet Australian safety standards?
While not all roof rack accessories require formal certification, our stocked brands are known for meeting or exceeding Australian quality expectations.
RacksBrax HD Hitch Standard
RacksBraxHD Hitch Standard by RacksBrax The HD Hitch Standard (8159, 8510) (pat. pend) is part of RacksBrax HD range.- The HD Hitch Standard (8159, 8510) i...
View Full DetailsRacksBrax HD XD Pin Part
RacksBraxHD XD Pin Part by RacksBrax 2 x Pins for HD or XD Hitch Bodies A glass-reinforced nylon component which pins the Holder (on the accessory) to the ...
View Full DetailsRacksBrax XD Wall Mount
RacksBraxXD Wall Mount by RacksBrax The XD Wall Mounts (9010) (pat. pend) is part of RacksBrax XD range. Swap from Commuter to Camper and back again with t...
View Full DetailsRacksBrax HD Awning Adaptor Plates
RacksBraxHD Awning Adaptor Plates by RacksBrax The HD Awning Adaptor Plates (8192, 8193) is part of RacksBrax HD range. This product is compatible across o...
View Full DetailsRacksBrax HD Hitch Tradesman III
RacksBraxHD Hitch Tradesman III by RacksBrax The HD Hitch Tradesman III (8163, 8181) (pat. pend) is part of RacksBrax HD range.- The HD Hitch Tradesman III...
View Full DetailsRacksBrax HD Wall Mount
RacksBraxHD Wall Mount by RacksBrax The HD Wall Mount (8160) (pat. pend) is part of RacksBrax HD range.This product is compatible across the entire RacksBr...
View Full DetailsRacksBrax HD Hitch Tradesman II
RacksBraxHD Hitch Tradesman II by RacksBrax The HD Hitch Tradesman II (8162, 8180) (pat. pend) is part of RacksBrax HD range.- The HD Hitch Tradesman II (8...
View Full DetailsRacksBrax HD Cover Part
RacksBraxHD Cover Part by RacksBrax 2 x Covers for HD Hitch Bodies A glass-reinforced nylon component which fixes to the HD Hitch Body on a roof rack when ...
View Full DetailsRacksBrax HD XD Pin Lanyard Part
RacksBraxHD XD Pin Lanyard Part by RacksBrax 2 x Lanyards for HD or XD Hitch Bodies A nylon coated stainless steel wire lanyard which attaches to the HD Hi...
View Full DetailsRacksBrax HD Prop Cleat Part
RacksBraxHD Prop Cleat Part by RacksBrax2 x Prop Cleats for Roof Rack Accessories A glass-reinforced nylon component which attaches to the spine of a pull-o...
View Full DetailsRacksBrax HD Holder Part
RacksBraxHD Holder Part by RacksBrax 2 x Holders for HD Hitch Bodies A glass-reinforced nylon component which permanently fixes to a roof rack accessory to...
View Full DetailsRacksBrax HD XD Lock With 1 Key Part
RacksBraxHD XD Lock With 1 Key Part by RacksBrax 2 x Replacement Barrel Locks for HD or XD Hitch Bodies Each come with its own key. Replacement barrel lock...
View Full DetailsRacksBrax HD Accessory Bars for MaxTrax or TRED Recovery Boards
RacksBraxHD Accessory Bars for Mounting MaxTrax and TRED Recovery Boards by RacksBrax Introducing the RacksBrax HD Accessory Bars designed to mount your Ma...
View Full DetailsRacksBrax HD Accessory Plate for MaxTrax or TRED Recovery Boards
RacksBraxHD Accessory Plate by RacksBrax The HD Accessory Plate (8174) is part of RacksBrax HD range. This product is compatible across our entire RacksBra...
View Full DetailsRacksBrax HD Lockable Wall Mount
RacksBraxHD Lockable Wall Mount by RacksBrax The HD Lockable Wall Mount (8161) (pat. pend) is part of the RacksBrax HD range. This product is compatible ac...
View Full DetailsRacksBrax HD Hitch (Triple)
RacksBraxHD Hitch (Triple) by RacksBrax The HD Hitch (Triple) (8182, 8183) (pat. pend) is part of RacksBrax HD range. The HD Hitch (Triple) (8182) is ideal...
View Full DetailsRacksBrax HD L Brackets
RacksBraxHD L Brackets by RacksBrax The HD L50 L Brackets (8300, 8301) is part of RacksBrax HD range. This product is compatible across our entire RacksBra...
View Full DetailsRacksBrax XD Hitch
RacksBraxXD Hitch by RacksBrax The XD Hitch (Double, Triple) (9000, 9001) (pat. pend) is part of the RacksBrax XD range.- The XD Hitch (Double) (9000) is i...
View Full DetailsRacksBrax XD Lockable Wall Mount
RacksBraxXD Lockable Wall Mount by RacksBrax The XD Lockable Wall Mounts (9011) (pat. pend) is part of RacksBrax XD range.Swap from Commuter to Camper and ...
View Full DetailsRacksBrax HD Adjustable Brackets
RacksBraxHD Adjustable Brackets by RacksBrax The HD Adjustable Brackets (8304, 8305, 8306, 8307) is part of RacksBrax HD range. This product is compatible ...
View Full DetailsRacksBrax XD Adjustable Brackets
RacksBraxXD Adjustable Brackets by RacksBrax The XD Adjustable Brackets (9100, 9101, 9102, 9103) is part of RacksBrax XD range. The RacksBrax XD Adjustable...
View Full DetailsRacksBrax XD Multi-Awn Adaptor
RacksBraxXD Multi-Awn Adaptor by RacksBrax The XD Multi-Awn Adaptor is engineered to extend the number of roof rack mounted 180°, 270° and 360° wing-style ...
View Full DetailsRacksBrax XD Cover Part
RacksBraxXD Cover Part by RacksBrax 2 x Covers for XD Hitch BodiesA glass-reinforced nylon component which fixes to the XD Hitch Body on a roof rack when t...
View Full DetailsRacksBrax XD Holder Part
RacksBraxXD Holder Part by RacksBrax 2 x Holders for XD Hitch BodiesA glass-reinforced nylon component which permanently fixes to a roof rack accessory to ...
View Full Details