Saber SharkBite Quick Connect Automatic Tyre Deflators (4 Pack)

SharkBite Push-On Tyre Deflators with Hard Case by Saber Offroad

The Saber SharkBite tyre deflators take the slowest part of airing down and cut it right back. All four units push straight onto the valve, so there's no winding a deflator on and off each tyre, and once they're connected all four tyres let air out at the same time.

Each one has a mechanical preset you adjust yourself, with clear markings on the body. Dial in the pressure you run for the beach or the tracks, clip one onto each tyre and get on with the rest of the setup while they work. Once you've found a setting that suits your vehicle and the ground you drive, leave it there. It becomes a repeatable starting point for the next trip.

Tyre temperature, valve condition and normal tolerances all affect where an automatic tyre deflator stops, so check every tyre with a proper gauge before you drive off. Between trips the set packs into a fitted hard case that keeps all four together in the drawer or recovery bag.

Features

• Push-on quick connect fitting. Fitting and removal take seconds, with no winding on and off at either end of the job.
• Four automatic deflators in the kit, one per tyre, all airing down at the same time.
• Adjustable mechanical preset with clear markings, so setting up for sand or dirt pressures isn't guesswork.
• Works on its own once connected, leaving you free to sort the recovery gear, the passengers or the vehicle.
• Small enough to live in a recovery bag, drawer system or glovebox.
• Fitted hard case keeps the set together and protected.

Specifications

• SKU: SBR-TD4P
• Quantity: 4 deflators
• Connection: Push-on quick connect
• Preset: Adjustable, mechanical, with markings
• Storage: Fitted hard case

What's Included

• 4 x Saber SharkBite Quick Connect Tyre Deflators
• 1 x Hard storage case

Where You'll Use Them

Beach and sand, dirt roads, corrugations, mud and general 4WD touring. Anywhere you drop pressures before leaving the bitumen.

Before You Drive

Pull each deflator off. Check every tyre with a reliable gauge and adjust individual tyres where needed. Reinflate to the correct road pressure before you're back on sealed roads. The preset markings are a guide to where the deflator should stop; they are not a substitute for a gauge.

Prefer a single deflator with a gauge in the same hand? Have a look at the Saber Offroad Tyre Deflator and Pressure Gauge. And when it's time to pump back up to road pressure, our air compressors and accessories sit alongside the rest of our 4x4 recovery gear.