Extang Trifecta 2.0 Tri-Fold Soft Folding Tonneau Cover for Toyota Hilux Double Cab

The Trifecta 2.0 arrives fully assembled with all mounting hardware and an installation guide. Extang's clamp system and EZ-Lock clamps are included, so no additional hardware is required for a standard installation on the Hilux double cab.

The MAX hinges use a double-pivot design, allowing the panels to fold more smoothly and sit flatter when open compared to single-pivot hinges found on earlier-generation covers. The double-pivot design also distributes stress more evenly across the hinge points during repeated folding cycles, which is a common wear point on older tonneau covers. Combined with the redesigned frame and corners, the Trifecta 2.0 is more structurally robust than the original Trifecta design.

Rather than using adhesive-backed weatherstripping, the Trifecta 2.0's seals snap onto the frame mechanically. This removes the risk of adhesive failure over time, which is a genuine concern in hot Australian conditions where adhesive seals can lift or peel. If a seal ever needs replacing, it can be removed and snapped back into place without special tools or adhesive reapplication.

This listing is for the Toyota Hilux double cab, which is the four-door body style with the full-size rear passenger cabin. It is not designed for the extra cab (also called space cab) configuration, which has a shorter rear cabin and different bed dimensions. We recommend confirming your specific Hilux model year is compatible before ordering, as different Hilux generations have different bed profiles.

The Trifecta 2.0 is a soft folding cover and does not include a keyed lock. The EZ-Lock clamps hold the cover to the bed rails and keep it closed, but the vinyl construction means it is not a high-security solution. It provides solid weather protection and discourages casual access. If locking capability is a priority, a hard folding cover with an integrated auto-latch system would be more appropriate.

We recommend avoiding automatic car washes with brush contact when using any soft folding tonneau cover. The brushes and water pressure in a roll-through car wash can get under the seals and potentially stress the vinyl or frame over time. A hand wash or touchless car wash is preferable and will extend the life of the cover.

The corner tuck system maintains tension across the vinyl tarp at the corners, which is typically where sag and flapping begin on older-style covers. By keeping the fabric pulled consistently tight at all four corners, the cover maintains a flatter appearance and the edges stay in better contact with the seals, improving weather resistance over time.

Both covers are available for the Toyota Hilux, but the Trifecta 2.0 is a soft folding vinyl cover while the Solid Fold 2.0 uses 1-inch thick hard EnduraShield polymer panels. The Solid Fold 2.0 is heavier and more rigid, offering better impact and intrusion resistance. The Trifecta 2.0 is lighter, easier to fully fold back, and better suited for buyers who prioritise ease of use and a lower price point. For Hilux owners who frequently need full tub access or carry lighter loads, the Trifecta 2.0 is a practical, everyday choice.