Warn VR Evo 10-S Winch with Synthetic Rope

The VR Evo 10-S with its 10,000lb (4,536kg) rated line pull is a strong match for popular dual-cab utes, mid-size and large SUVs, and loaded touring wagons. A common rule of thumb is to select a winch rated at 1.5 times your vehicle's GVM.

The 10-S uses the standard 254mm x 114.3mm mounting bolt pattern, which suits the vast majority of winch-compatible bull bars sold in Australia. Always verify your bar is rated to handle a 10,000lb winch load before installation.

You get the VR Evo 10-S winch unit, 9.5mm x 27.4m Spydura synthetic rope pre-spooled on the drum, a die-cast hawse fairlead, a two-in-one wired and wireless remote, battery leads (25mm x 2m), and mounting hardware.

Yes. The included two-in-one remote gives you the choice of wired control via a 3.5m lead or wireless Bluetooth control, so you can operate from inside the vehicle or from a safe position during a recovery.

The winch carries an IP68 water and dust ingress rating, meaning the motor and electronics are sealed against continuous immersion. It handles rain, mud, and shallow water crossings without issue.

Warn specifies a minimum 650 CCA battery for winching operation. For vehicles doing a lot of remote touring, a dual battery setup with an AGM deep-cycle secondary is the practical choice.

The VR Evo 10-S carries a limited lifetime mechanical warranty and a 7-year electrical warranty, which reflects Warn's long-standing reliability record.

The primary difference is rated line pull: 10,000lb vs 8,000lb. The 10-S suits heavier or better-equipped vehicles where the extra pulling capacity provides a meaningful safety margin. Both share the same IP68 rating, bolt pattern, synthetic rope diameter, and two-in-one remote. The 10-S weighs approximately 32.84kg shipped versus 25.1kg for the 8-S.