{"product_id":"front-runner-slimsport-roof-rack-kit-for-subaru-outback-gen-6-2020-current","title":"Front Runner Slimsport Roof Rack Kit for Subaru Outback GEN 6 | 2020-Current","description":"\u003c!-- more --\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- Meta description: Low-profile Front Runner Slimsport roof rack kit for Subaru Outback GEN 6 (2020\u0026ndash;current). Full-length flat deck with T-slots, quiet fairing, and sunroof slide compatibility. --\u003e\n\u003ch2\u003eSubaru Outback GEN 6 Slimsport Roof Rack Kit by Front Runner\u003c\/h2\u003e\n\u003cp\u003eIf you’re running a Gen 6 Outback, you probably didn’t buy it to leave it stock and empty. These wagons get used. Camping trips, work during the week, bikes on the weekend, recovery gear tucked in somewhere “just in case”. And at some point, you realise the cabin just isn’t enough.\u003c\/p\u003e\n\u003cp\u003eThe Front Runner Slimsport Roof Rack Kit for Subaru Outback GEN 6 (2020–current) gives you a proper, usable platform up top without turning your wagon into a bulky wind-catcher. It’s low-profile, lightweight, and built to follow the roofline so it still looks right on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThis is the kind of rack you can set up once and build on over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow Profile. Full-Length Platform\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Slimsport uses a flat-deck design with a generous load-carrying area of 1999mm x 1151mm. That’s real space for touring boxes, swags, recovery boards or sports gear.\u003c\/p\u003e\n\u003cp\u003eThe side rails feature integrated mounting feet, reinforced with additional brace brackets for added strength. The aluminium slats are high-strength and run top and bottom T-slots, so mounting Front Runner accessories is straightforward and secure. No drilling into the rack. No messy workarounds.\u003c\/p\u003e\n\u003cp\u003eIf you want easier access to your gear, you can add the Handle\/Light Slimsport Rack Bracket. And if you’re expanding your setup, the Slimsport Side Mount Accessory Bracket \/ Small (sold separately) lets you run compatible side-mount accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuiet on the Road\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe included full fairing with rubber edge trim helps smooth airflow across the front of the rack, keeping wind noise down during highway driving. It’s designed to be practical day-to-day, not just when you’re off-road.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLight Bar Option Available\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you’re planning to add auxiliary lighting later, there’s an optional RRAC2328 wind fairing (sold separately) with a 40-inch cut-out to suit the 40\" LED Slim Light Bar VX1000-CB SM (12V\/24V, single mount). It keeps the install clean and integrated rather than looking like an afterthought.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSunroof Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor Outbacks fitted with a sunroof, it remains fully operational in slide open and closed modes once the rack is installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e The sunroof is not operational in vent \/ tilt mode.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLow-profile, lightweight Slimsport roof rack design for Subaru Outback GEN 6 (2020–current)\u003c\/li\u003e\n\u003cli\u003eFlat-deck platform with load-carrying area of 1999mm x 1151mm\u003c\/li\u003e\n\u003cli\u003eSleek side rails with integrated mounting feet\u003c\/li\u003e\n\u003cli\u003eAdditional brace brackets for added strength\u003c\/li\u003e\n\u003cli\u003eHigh-strength aluminium slats with top and bottom T-slots\u003c\/li\u003e\n\u003cli\u003eT-slots suit Front Runner top mount accessories\u003c\/li\u003e\n\u003cli\u003eHandle\/Light Slimsport Rack Bracket option for easier access to cargo\u003c\/li\u003e\n\u003cli\u003eOptional Slimsport Side Mount Accessory Bracket \/ Small available (sold separately) for compatible side-mount accessories\u003c\/li\u003e\n\u003cli\u003eIncluded full fairing with rubber edge trim for reduced wind noise\u003c\/li\u003e\n\u003cli\u003eOptional RRAC2328 fairing (sold separately) with 40-inch cut-out to suit 40\" LED Slim Light Bar VX1000-CB SM (sold separately)\u003c\/li\u003e\n\u003cli\u003eFitment guide and mounting hardware included\u003c\/li\u003e\n\u003cli\u003e6\"\/T30 Torx Allen Key required for installation (sold separately)\u003c\/li\u003e\n\u003cli\u003eSunroof operational in slide open and closed modes (not operational in vent \/ tilt mode)\u003c\/li\u003e\n\u003cli\u003eUnder Rack Tables are not compatible with Slimsport rack kits\u003c\/li\u003e\n\u003cli\u003eSome side-mount accessories (including Hi-Lift Jack Bracket and Recovery Device \u0026amp; Gear Holding Side Brackets) are not compatible with the Slimsport Tray range\u003c\/li\u003e\n\u003cli\u003eBacked by Front Runner Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial Used\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack epoxy powder - coated T6 aluminium\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh strength steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssembled Rack Dimensions\u003c\/strong\u003e\u003cbr\u003e1999mm (78.7\") L x 1151mm (45.3\") W x 137mm (5.4\") H\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApproximate Installed Weight\u003c\/strong\u003e: 33.74kg (73.38lbs)\u003c\/p\u003e\n\u003cp\u003eThe t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.\u003c\/p\u003e\n\u003cp\u003eTo determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4\"-2.8\") to the highest point of your roof.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Dimensions\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 330mm (13\")\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLength: 1700mm (67\")\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeight: 220mm (9\")\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 36kg (79lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x KSSO002 - Subaru Outback GEN 6 (2020-Current) Slimsport Tray\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x RRAC327 - Subaru Outback gen 6 (20-Curr)Slmsprt Wnd Fairing\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eUser Manual\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1926\/8595\/files\/Slimsport_Rack_Wind_Fairing_Fitting_Instruction.pdf?v=1770860411\" title=\"RRAC327\" aria-label=\"Visit a webpage about RRAC327\"\u003eRRAC327 Fitting Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Front Runner Outfitters","offers":[{"title":"Default Title","offer_id":47968493502689,"sku":"KSSO004T","price":1645.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/8595\/files\/front-runner-slimsport-roof-rack-kit-subaru-outback-gen-6-2020-current-racks-561.webp?v=1771821675","url":"https:\/\/www.4x4downunder.com.au\/products\/front-runner-slimsport-roof-rack-kit-for-subaru-outback-gen-6-2020-current","provider":"4x4 Down Under","version":"1.0","type":"link"}